How to Alter a Wrap Dress Neckline
Are you the proud owner of a wrap dress that no longer fits quite right? Perhaps the neckline is too high or too low, or maybe it’s just not the style you were expecting. Don’t worry; altering a wrap dress neckline is a straightforward process that can be done at home with a few simple supplies. In this article, we’ll guide you through the steps to alter a wrap dress neckline, ensuring that your dress fits perfectly and flatters your figure.
Step 1: Assess the Issue
Before you start altering your wrap dress neckline, it’s essential to understand the problem. Take a good look at your dress and determine whether the neckline is too high, too low, or if the style just doesn’t suit you. This will help you decide which alteration is needed.
Step 2: Gather Your Supplies
To alter your wrap dress neckline, you’ll need the following supplies:
– Fabric scissors
– Seam ripper
– Pins
– Measuring tape
– Fabric marker
– Thread that matches your dress
– Sewing machine or needle and thread
Step 3: Remove the Lining (If Necessary)
If your wrap dress has a lining, it’s a good idea to remove it to make the alteration process easier. Carefully remove the lining using a seam ripper, being careful not to damage the dress fabric.
Step 4: Measure and Mark the New Neckline
Using your measuring tape, measure the desired neckline depth. Then, mark the new neckline on the dress with a fabric marker. Make sure to measure from the shoulder seam to the desired depth, and also mark the center front and center back of the dress.
Step 5: Cut the Dress Fabric
Using fabric scissors, carefully cut the dress fabric along the marked lines. Remember to cut through both layers of fabric, as well as any seam allowances.
Step 6: Cut the Lining (If Necessary)
If you removed the lining in step 3, cut the lining in the same manner as the dress fabric, ensuring that the new neckline matches the dress fabric.
Step 7: Sew the New Neckline
Pin the dress fabric and lining together, right sides facing, and sew along the new neckline. Make sure to leave a small opening for turning the dress right side out.
Step 8: Turn and Press the New Neckline
Turn the dress right side out through the opening, and press the new neckline with an iron. If desired, topstitch the new neckline to give it a finished look.
Step 9: Reattach the Lining (If Necessary)
If you removed the lining in step 3, reattach it to the dress by hand-stitching or using a sewing machine. Make sure the lining is smooth and even with the dress fabric.
Step 10: Enjoy Your New Wrap Dress Neckline
Now that you’ve successfully altered your wrap dress neckline, you can enjoy wearing your favorite dress in a new and improved style. Whether you chose to lower the neckline or adjust the style, your dress should now fit perfectly and look fantastic.
