How to Alter Size of Stauer Compendium Hybrid Watch
The Stauer Compendium Hybrid Watch is a sophisticated timepiece that combines the elegance of traditional watches with the functionality of modern technology. However, one common issue that watch enthusiasts face is the need to alter the size of their watch band to fit their wrist perfectly. In this article, we will guide you through the process of how to alter the size of your Stauer Compendium Hybrid Watch band, ensuring a comfortable and stylish fit.
Materials Needed:
Before you begin, gather the following materials:
– Stauer Compendium Hybrid Watch band
– Watch band tool or a small flathead screwdriver
– New watch band links (if needed)
– Needle-nose pliers
– Optional: lubricant (for ease of movement)
Step 1: Remove the Watch Band
Start by removing the watch band from your Stauer Compendium Hybrid Watch. This can typically be done by pressing on the spring bars located at the lugs of the watch case. Use your watch band tool or a small flathead screwdriver to gently push the spring bars out, ensuring they are fully released.
Step 2: Assess the Band Size
Inspect the watch band to determine if it needs to be shortened or lengthened. If the band is too loose, you may need to remove links to make it smaller. If the band is too tight, you may need to add links to make it larger.
Step 3: Remove or Add Watch Band Links
To remove a link, insert the needle-nose pliers into the gap between the two links. Gently pull the pliers apart, allowing the link to come loose. Repeat this process for each link you need to remove.
To add a link, insert the new link into the gap between the two existing links. Ensure that the new link is securely in place by gently pressing on it with your fingers. Repeat this process for each link you need to add.
Step 4: Reassemble the Watch Band
Once you have adjusted the size of the watch band, reassemble it by reversing the steps taken in Step 1. Press the spring bars back into place, ensuring they are securely locked.
Step 5: Lubricate the Watch Band (Optional)
If you find that the watch band is difficult to move or feels stiff, you can apply a small amount of lubricant to the spring bars and hinges. This will help ensure smooth movement and prevent future issues.
Step 6: Test the Watch Band
After reassembling the watch band, put it back on your Stauer Compendium Hybrid Watch and test the fit. Ensure that the band is snug but not too tight, allowing for comfortable wear.
By following these simple steps, you can easily alter the size of your Stauer Compendium Hybrid Watch band, ensuring a perfect fit for your wrist. Remember to handle the watch band with care and seek professional assistance if you are unsure about any of the steps.
