How to Alter an Anarkali Top
Are you looking to give your favorite Anarkali top a fresh look or simply want to make it fit better? Altering an Anarkali top can be a fun and rewarding project, allowing you to customize the garment to your preferences. In this article, we will guide you through the process of altering an Anarkali top, from taking accurate measurements to making the necessary adjustments.
Step 1: Gather Your Materials
Before you begin, gather all the materials you will need for the alteration. This includes a measuring tape, fabric marker, pins, a sewing machine, and the necessary thread and needles. It’s also a good idea to have a pair of fabric scissors and a seam ripper on hand.
Step 2: Take Accurate Measurements
To ensure a successful alteration, it’s crucial to take accurate measurements of the Anarkali top. Measure the following areas:
– Bust: Measure around the fullest part of your bust, keeping the tape parallel to the floor.
– Waist: Measure around the narrowest part of your waist.
– Hip: Measure around the fullest part of your hips, keeping the tape parallel to the floor.
– Length: Measure from the highest point of your shoulder to the desired hem length.
Write down these measurements for reference.
Step 3: Determine the Necessary Adjustments
Based on your measurements, determine the necessary adjustments for your Anarkali top. Common alterations include:
– Adjusting the bust: If the top is too tight or too loose, you may need to take in or let out the bust area.
– Altering the waist: If the waist is too tight or too loose, you may need to take in or let out the waist area.
– Shortening or lengthening the sleeves: If the sleeves are too long or too short, you can adjust the length by taking in or letting out the sleeve seams.
– Shortening or lengthening the hem: If the hem is too long or too short, you can adjust the length by taking in or letting out the hem seams.
Step 4: Make the Adjustments
Using your fabric marker, mark the necessary areas for the adjustments on the Anarkali top. Pin the fabric in place and sew along the marked lines, ensuring a straight and even seam. Remember to backstitch at the beginning and end of each seam for durability.
Step 5: Remove the Seam Allowance
After making the adjustments, trim the seam allowance to about 1/4 inch (6 mm) from the stitched line. This will reduce bulk and make the top more comfortable to wear.
Step 6: Press the Seams
Using an iron, press the seams open or towards the side, depending on the direction of the original stitching. This will help the fabric lay flat and create a polished look.
Step 7: Try On the Altered Anarkali Top
Finally, try on the altered Anarkali top to ensure it fits comfortably and meets your expectations. Make any further adjustments if necessary.
By following these steps, you can successfully alter an Anarkali top to fit your body and style preferences. Happy sewing!
